|
UHF Jack-Female or SO-239 Coaxial Crimp Connector for AIR802 CA400 or Times Microwave LMR-400 Cable
AIR802® model CN4UHFJ is a UHF type jack-female crimp style connector for AIR802 CA400, Times Microwave LMR400, RG8, Belden 9913 and 7810 size cable.
Product Description - Model CN4UHFJ
This AIR802® connector is an UHF Jack (Female) or SO-239 crimp style connector for AIR802® CA400, Times Microwave LMR400® or similiar cables.
AIR802® manufactures high precision and performance connectors. Connector selection is extremely important to insure proper operation and reliability. Poorly constructed connectors will cause higher VSWR and insertion loss resulting in electrical noise and intermittent issues. AIR802® manufactures very large quantities of connectors for our global customers allowing us to provide an attractive quality to price ratio.
In choosing connectors, it is important to match one to the type of cable being used, the impedance (50 versus 75 ohms), the frequency support, insertion loss, voltage rating and environmental specifications. If you are an amateur considering buying connectors to install, we recommend that you purchase our pre-manufactured antenna cable assemblies which have been professionally assembled and tested. Installation of connectors without experience and proper equipment will lead to improperly terminated connectors.
UHF style connectors are used for lower band frequencies such as ham radio, CB, etc. up to 300 MHz.
Specifications
| ELECTRICAL | |
| Impedance | Non-Constant |
| Frequency Range | DC ~ 300 MHz |
| Voltage Rating | 500 Volts Peak |
| Dielectric Withstanding Voltage | 1000 Volts RMS |
| Insertion Loss | < 0.20 dB |
| MATERIAL | |
| Body | Nickel Plated Brass |
| Contact | Gold Plated Brass |
| Insulator | TFE |
| Ferrule | Nickel Plated Brass |
| MECHANICAL | |
| Cable Attachment | Hex Braid Crimp |
| Center Conductor Attachment | Solder or Crimp |
| Cable Retention | 60 lbs. Pull |
| Mating | 5/8 - 24 UNEF Threading |
| Mating Torque | 15 inch pounds Maximum |
| ENVIRONMENTAL | |
| Temperature | -67°F to 185°F (-55°C to 85° C) |
| RoHS Compliant | Yes |
| Corrosion | MIL-Std. 202 Method 101 (Test Condition C) |
| Temperature Cycling | MIL-Std. 202 Method 102 (Test Condition C) |
| Altitude | MIL-Std. 202 Method 105 (Test Condition C) |
| Vibration | MIL-Std. 202 Method 204 (Test Condition B) |
| Moisture Resistance | MIL-Std. 202 Method 106 (Test Condition B) |
Download PDF Connector Drawing
Product Warranty
This connector is of absolute quality and is fully covered under by the AIR802 LLC Limited Warranty.
