N Male-Plug to Reverse Polarity SMA (RP-SMA) Plug-Male Adapter

AIR802® part number AD-NMRSP is a 50 ohm coaxial adapter from a type N plug-male to a reverse polarity SMA (RP-SMA) plug-male connector type.

AIR802® manufactures high precision and performance adapters and connectors. Adapter and connector selection is extremely important to insure proper operation and reliability. Poorly constructed adapters and/or connectors will cause higher VSWR and insertion loss resulting in electrical noise and intermittent issues. AIR802® manufactures very large quantities of adapters and connectors for our global customers allowing us to provide an attractive quality to price ratio.

In choosing adapters and/or connectors, it is important to match one to the type of cable being used, the impedance (50 versus 75 ohms), the frequency support, insertion loss, voltage rating and environmental specifications. Adapters are very useful for matching different connector types.

This is a N-Male to Reverse Polarity (RP-SMA) Plug adapter. N-Male is also considered a plug. The RP-SMA plug is considered a male. Male and female are confusing to the novice as they are not intuitive. We prefer the terminology plug / jack instead of male / female. The RP-SMA Plug has threads on the inside and the center pin is inside the connector and does not protrude.

Specifications

ELECTRICAL
Impedance	50 ohms
Frequency Range	DC ~ 11 GHz
Voltage Rating	500 Volts Peak
Dielectric Withstanding Voltage	1000 Volts RMS
Insertion Loss	.15 dB Max.
MATERIAL
Body	Nickel Plated Brass
Contact	Gold Plated Brass
Insulator	TFE
Ferrule	Not Applicable
MECHANICAL
Cable Attachment	Not Applicable
Center Conductor Attachment	Not Applicable
Cable Retention	Not Applicable
Mating	N=5/8-24 UNEF; RP-SMA=1/4-36 UNS
Mating Torque	15 inch pounds Max.
ENVIRONMENTAL
Temperature	-67°F to 185°F (-55°C to 85° C)
Weatherproof	N & RP-SMA Type Connectors are Weatherproof
RoHS Compliant	Yes
Corrosion	MIL-Std. 202 Method 101 (Test Condition C)
Temperature Cycling	MIL-Std. 202 Method 102 (Test Condition C)
Altitude	MIL-Std. 202 Method 105 (Test Condition C)
Vibration	MIL-Std. 202 Method 204 (Test Condition B)
Moisture Resistance	MIL-Std. 202 Method 106 (Test Condition B)