SMA Plug / Male Crimp Connector for Cable Types: RG58, AIR802 CA195, Times Microwave's LMR195, Belden 8240/8219

AIR802® model CN2SMAP is a SMA type plug-male crimp connector for AIR802 CA195, Times Microwave LMR195, RG58, Belden 8240 and 8219 size cable.

AIR802® manufactures high precision and performance connectors, including this SMA plug or male connector for RG58 or 195-series cable. Connector selection is extremely important to insure proper operation and reliability. Poorly constructed connectors will cause higher VSWR and insertion loss resulting in electrical noise and intermittent issues. AIR802® manufactures very large quantities of connectors for our global customers allowing us to provide an attractive quality to price ratio.

In choosing connectors, it is important to match one to the type of cable being used, the impedance (50 versus 75 ohms), the frequency support, insertion loss, voltage rating, cable size or type and environmental specifications. If you are an amateur considering buying connectors to install, we recommend that you purchase our pre-manufactured antenna cable assemblies which have been professionally assembled and tested. Installation of connectors without experience and proper equipment will lead to improperly terminated connectors.

This connector is a SMA plug for RG58 and 195-Series type cables, such as AIR802® CA195 and Times Microwave's LMR195&#174. Connectors can be a bit confusing regarding the gender. There are also Reverse Polarity (RP) SMA connectors. RP-SMA is common with many wireless products. SMA plug or male connectors have a pin protruding from the center of the connector. The RP-SMA plug or male connector does not have pin in the center protruding but rather has a receptacle. This causes confusion for many not familiar with various connector types. Male and female are regularly mixed up since they are not always intuitive. We generally prefer the terms plug and jack to male versus female for clarity.

Specifications

ELECTRICAL
Impedance	50 ohms
Frequency Range	DC ~ 11 GHz
Voltage Rating	500 Volts Peak
Dielectric Withstanding Voltage	1000 Volts RMS
Insertion Loss	.20 dB Max.
MATERIAL
Body	Nickel Plated Brass
Contact	Gold Plated Brass
Insulator	TFE
Ferrule	Nickel Plated Brass
MECHANICAL
Cable Attachment	Hex Braid Crimp
Center Conductor Attachment	Solder
Cable Retention	30 lbs. Pull
Mating	1/4 - 36 UNEF Threading
Mating Torque	15 inch pounds Maximum
ENVIRONMENTAL
Temperature	-67°F to 185°F (-55°C to 85° C)
Weatherproof	Yes
RoHS Compliant	Yes
Corrosion	MIL-Std. 202 Method 101 (Test Condition B)
Temperature Cycling	MIL-Std. 202 Method 102 (Test Condition C)
Altitude	MIL-Std. 202 Method 105 (Test Condition C)
Vibration	MIL-Std. 202 Method 204 (Test Condition D)
Moisture Resistance	MIL-Std. 202 Method 106 (Test Condition B)