|
Reverse Polarity SMA (RP-SMA) Plug-Male Right Angle Connector for RG8X, AIR802 CA240, Times Microwave LMR240, Belden 7808 and Equivalent Size Cables
CN3RSPRA is a reverse polarity SMA (RP-SMA) type plug or male right angle connector for RG8X, AIR802® CA240, Times Microwave LMR240®, Belden 7808 and similar size 50 ohm impedance cables.
Model CN3RSPRA is a reverse polarity SMA (RP-SMA) plug or male right angle connector sized to fit AIR802® CA240, Times Microwave LMR240®, RG8X, Belden 7808 and equivalent size 50 ohm cables. This connector consists of three parts, the body, ferrule and pin.
RP-SMA are sub-miniature type connectors with screw style coupling. There are both SMA and RP-SMA type connectors. It is quite common for these to be confused. The SMA male has a pin protruding. However the RP-SMA male has a center receptacle thus causing those unfamiliar to be confused. We often use the terms plug for male and jack for female since plug and jack tend to lead to less confusion. RP-SMA connectors are utilized in a broad range of applications, particularly in Wi-Fi products.
Specifications
| ELECTRICAL | |
| Impedance | 50 ohms |
| Frequency Range | DC ~ 11 GHz |
| Voltage Rating | 375 Volts Peak |
| Dielectric Withstanding Voltage | 1000 Volts RMS |
| Insertion Loss |
.03 v[f (GHz)] dB maximum
|
| VSWR | 1.27 maximum at 6 GHz |
| MATERIAL | |
| Body | Nickel Plated Brass |
| Contact | Gold Plated Brass |
| Insulator | TFE |
| Ferrule | Nickel Plated Brass |
| MECHANICAL | |
| Cable Attachment | Hex Braid Crimp |
| Center Conductor Attachment | Solder |
| Cable Retention | 60 lbs. Pull |
| Mating | 1/4 - 36 UNEF Threaded Coupling |
| Mating Torque | 15 inch pounds Max. |
| ENVIRONMENTAL | |
| Temperature | -67°F to 185°F (-55°C to 85° C) |
| RoHS Compliant | Yes |
| Corrosion | MIL-Std. 202 Method 101 (Test Condition B) |
| Temperature Cycling | MIL-Std. 202 Method 102 (Test Condition C) |
| Altitude | MIL-Std. 202 Method 105 (Test Condition C) |
| Vibration | MIL-Std. 202 Method 204 (Test Condition B) |
| Moisture Resistance | MIL-Std. 202 Method 106 (Test Condition B) |
