|
N Jack (Female) Crimp Connector for Cable Types: AIR802 CA195R, RG58/141/142, Times Microwave's LMR195, Belden 8240/8219
AIR802® model CN2NF is a N type jack-female crimp style connector for AIR802 CA195, Times Microwave LMR195, RG58, Belden 8240 and 8219 size cable.
AIR802® manufactures precision made and high performance connectors including this N jack (female) crimp style connector for the cable types: RG58, AIR802® CA195R, Times Microwaves's LMR195 and other similar size cables. Connector selection is extremely important to insure proper operation and reliability. Poorly constructed connectors will cause higher VSWR and insertion loss resulting in electrical noise and intermittent issues. AIR802® manufactures very large quantities of connectors for our global customers allowing us to provide an attractive quality to price ratio.
In choosing connectors, it is important to match one to the type of cable being used, the impedance (50 versus 75 ohms), the frequency support, insertion loss, voltage rating and environmental specifications. If you are an amateur considering buying connectors to install, we recommend that you consider purchasing our pre-manufactured antenna cable assemblies which have been professionally assembled and tested. Installation of connectors without experience and proper equipment will lead to improperly terminated connectors.
This connector is N jack (female) crimp style. N type connectors were developed in the 1940's by Paul Neill of Bell Labs and were one of the first connectors capable of transmitting microwave frequencies. N type connectors are manufactured in both 50 and 75 ohm versions. This connector is 50 ohm.
Specifications
| ELECTRICAL | |
| Impedance | 50 ohms |
| Frequency Range | DC ~ 11 GHz |
| Voltage Rating | 1500 Volts Peak |
| Dielectric Withstanding Voltage | 2500 Volts RMS |
| Insertion Loss | .20 dB Max. |
| MATERIAL | |
| Body | Nickel Plated Brass |
| Contact | Gold Plated Brass |
| Insulator | PTFE Natural |
| Ferrule | Nickel Plated Copper |
| MECHANICAL | |
| Cable Attachment | Hex Braid Crimp |
| Center Conductor Attachment | Crimp or Solder |
| Cable Retention | 30 lbs. Pull |
| Mating | 5/8 - 24 UNEF Threading |
| Mating Torque | 15 inch pounds Max. |
| ENVIRONMENTAL | |
| Temperature | -67°F to 185°F (-55°C to 85° C) |
| RoHS Compliant | Yes |
| Corrosion | MIL-Std. 202 Method 101 (Test Condition C) |
| Temperature Cycling | MIL-Std. 202 Method 102 (Test Condition C) |
| Altitude | MIL-Std. 202 Method 105 (Test Condition C) |
| Vibration | MIL-Std. 202 Method 204 (Test Condition B) |
| Moisture Resistance | MIL-Std. 202 Method 106 (Test Condition B) |
Download PDF Connector Drawing
Product Warranty
This connector is of absolute quality and is fully covered under by the Air802 LLC Limited Warranty.
Terminology Note: Due to various terminology this connector may be referred to as: n-female for 195, n-female for rg58, n female crimp connector WBC 195 RG 58 LMR 195, n female crimp connector for 195, n jack for rg58, n jack for lmr 195
