N Plug-Male Right Angle Hex Crimp Connector for AIR802 CA400, Times Microwave LMR400, Belden 9913, RG8 and Similiar Sized Cables
Zoom image

N Plug-Male Right Angle Hex Crimp Connector for AIR802 CA400, Times Microwave LMR400, Belden 9913, RG8 and Similiar Sized Cables


Not rated yet

AIR802® model CN4NMRA-TMH is a N type plug-male hex right angle crimp style connector for AIR802 CA400, Times Microwave LMR400, RG8, Belden 9913 and 7810 size cables. This connector is tri-metal (copper/tin/zinc) plated, or sometimes referred to as white bronze for corrosion resistance and low intermodulation distortion. 

  • $11.95
Qté:  
AIR802® model CN4NMRA-TMH is a N plug-male right angle hex coaxial crimp connector sized to fit RG8, AIR802® CA400, Times Microwave LMR400® and other 400-Series cable. This connector is tri-metal (copper/tin/zinc) plated, or sometimes referred to as white bronze for corrosion resistance and low intermodulation distortion.
 
 AIR802® manufactures high precision and performance connectors. Connector selection is extremely important to insure proper operation and reliability. Poorly constructed connectors will cause higher VSWR and insertion loss resulting in electrical noise and intermittent issues. AIR802® manufactures very large quantities of connectors for our global customers allowing us to provide an attractive quality to price ratio.
In choosing connectors, it is important to match one to the type of cable being used, the impedance (50 versus 75 ohms), the frequency support, insertion loss, voltage rating, cable size or type and environmental specifications. If you are an amateur considering buying connectors to install, we recommend that you purchase our pre-manufactured antenna cable assemblies which have been professionally assembled and tested. Installation of connectors without experience and proper equipment will lead to improperly terminated connectors.

N type connectors were developed in the 1940's by Paul Neill of Bell Labs and were one of the first connectors capable of transmitting microwave frequencies. N type connectors are manufactured in both 50 and 75 ohm versions. This impedance of this connector is 50 ohm.       

Specifications

 

ELECTRICAL  
Impedance 50 ohms
Frequency Range DC to 11 GHz
Voltage Rating 1500 Volts Peak
Dielectric Withstanding Voltage 2500 Volts RMS
Insertion Loss

.20 dB Max.

MATERIAL  
Body Tri-Metal (Copper/Tin/Zinc) Plated Brass
Contact Gold Plated Brass
Insulator PTFE
Ferrule Tri-Metal (Copper/Tin/Zinc) Plated Copper
Gasket Orange Silicon Rubber
MECHANICAL  
Cable Attachment Hex Braid Crimp
Center Conductor Attachment Solder
Cable Retention 40 lbs. Pull
Mating Torque 15 inch pounds Maximum
ENVIRONMENTAL  
Temperature -67°F to 185°F (-55°C to 85° C)
RoHS Compliant Yes
Corrosion MIL-Std. 202 Method 101 (Test Condition C)
Temperature Cycling MIL-Std. 202 Method 102 (Test Condition C)
Altitude MIL-Std. 202 Method 105 (Test Condition C)
Vibration MIL-Std. 202 Method 204 (Test Condition B)
Moisture Resistance MIL-Std. 202 Method 106 (Test Condition B)

 

 

Download PDF Connector Drawing

    • Poids
      0.3 lbs
    • Réf.
      CN4NMRA-TMH
Customer reviews
Please sign in to add review
There are no comments yet. Be the first to leave a comment