N Plug Male Clamp Style Connector for RG8, AIR802 CA400, Times Microwave LMR400, Belden 9913
AIR802® model CN4NMCLP is a N type plug-male clamp style coaxial connector for AIR802 CA400, Times Microwave LMR400, RG8, Belden 9913 and 7810 size cables.
AIR802® manufactures precision made and high performance connectors including this part number CN4NMCLP, which is a N plug or male clamp style connector for RG8, AIR802 CA400, Times Microwave's LMR 400®, Belden 9913, and similar type cables. Connector selection is extremely important to insure proper operation and reliability. Poorly constructed connectors will cause higher VSWR and insertion loss resulting in electrical noise and intermittent issues. AIR802® manufactures very large quantities of connectors for our global customers allowing us to provide an attractive quality to price ratio.
In choosing connectors, it is important to match one to the type of cable being used, the impedance (50 versus 75 ohms), the frequency support, insertion loss, voltage rating and environmental specifications. If you are an amateur considering buying connectors to install, we recommend that you purchase our pre-manufactured antenna cable assemblies which have been professionally assembled and tested. Installation of connectors without experience and proper equipment will lead to improperly terminated connectors.
This connector is a N plug or male clamp style connector. N type connectors are weatherproof and durable for use in a wide and varied applications. The type N connector was developed in the 1940's and is named after Paul Neill of Bell Labs. Clamp style connectors use a wedge ring for securing the outer shielding conductor to the connector body whereas a crimp style connector utilizes a ring that is hex crimped around outer shielding conductor. Clamp style connectors can be reused unlike crimp style connectors but are more complex to install.
Specifications
ELECTRICAL | |
Impedance | 50 ohms |
Frequency Range | DC ~ 11 GHz |
Voltage Rating | 1500 Volts Peak |
Dielectric Withstanding Voltage | 2500 Volts RMS |
Insertion Loss | .15 dB Maximum at 10 GHz |
VSWR | 1.3 max @ 0 - 11 GHz |
MATERIAL | |
Body | Nickel Plated Brass |
Contact | Gold Plated Brass |
Insulator | TFE |
Back Nut | Nickel Plated Brass |
Washer | Nickel Plated Brass |
Gasket | Orange Silicon Rubber |
Clamp | Nickel Plated Brass |
Shell | Nickel Plated Brass |
Retaining Ring | Nickel Plated Brass |
Grounding | Nickel Plated Brass |
MECHANICAL | |
Cable Attachment | Clamp |
Center Conductor Attachment | Crimp or Solder Pin |
Cable Retention | 30 to 70 lbs. Pull |
Mating | 5/8-24 UNEF Threaded Coupling |
ENVIRONMENTAL | |
Temperature | -67°F to 185°F (-55°C to 85° C) |
RoHS Compliant | Yes |
Corrosion | MIL-Std. 202 Method 101 (Test Condition B) |
Temperature Cycling | MIL-Std. 202 Method 102 (Test Condition C) |
Altitude | MIL-Std. 202 Method 105 (Test Condition C) |
Vibration | MIL-Std. 202 Method 204 (Test Condition B) |
Moisture Resistance | MIL-Std. 202 Method 106 |