|
|
|
TNC Reverse Thread (Left-Hand Threading) Plug-Male Crimp Coax Connector for RG8, AIR802 CA400, Times Microwave's LMR400 or Belden 9913 Cable
AIR802® model CN4TNPRT is a TNC reverse thread (left-hand thread) type plug-male crimp style connector for AIR802 CA400, Times Microwave LMR400, RG8, Belden 9913 and 7810 size cable.
AIR802® model CN4TNPRT is a TNC reverse thread (also known as left hand thread) plug-male crimp style coaxial connector for RG8, AIR802® CA400, Times Microwave's LMR400®, Belden 9913 and similar cables.
Our connector engineering and manufacturing processes always maintain 100% quality focus. This is extremely important since low cost and poor quality design and production in addition to improperly installed connectors will result in higher VSWR and insertion loss.
The majority of our customers purchase our manufactured CA400, CA400FLEX black or CA400FLEX white type antenna cables with this type of connector professionally assembled and tested on our factory floor.
This connector is a TNC reverse thread plug-male. Connectors can be confusing. Note that in addition to this reverse thread there are regular standard TNC and reverse polarity types.
Download PDF Connector Drawing
|
ELECTRICAL
|
|
|
Impedance
|
50 ohms
|
|
Frequency Range
|
0 ~ 11 GHz
|
|
Voltage Rating
|
500 Volts Peak
|
|
Dielectric Withstanding Voltage
|
1500 Volts RMS
|
| VSWR |
1.3 dB Maximum (0 to 11 GHz)
|
|
MATERIAL
|
|
|
Body
|
Nickel Plated Brass
|
|
Contact
|
Gold Plated Brass
|
|
Insulator
|
PTFE
|
|
Ferrule
|
Nickel Plated Brass
|
| Gasket | Red Rubber |
|
MECHANICAL
|
|
|
Cable Attachment
|
Hex Braid Crimp (.429" - 10.9mm)
|
|
Center Conductor Attachment
|
Solder or Crimp (.128" - 3.25"mm) |
|
Cable Retention
|
40 lbs. Pull
|
|
Mating
|
7/16 - 28 UNEF Threading Coupling
|
|
Mating Torque
|
15 inch pounds Maximum
|
|
ENVIRONMENTAL
|
|
|
Temperature
|
-67°F to 185°F (-55°C to 85° C)
|
|
RoHS Compliant
|
Yes
|
|
Corrosion
|
MIL-Std. 202 Method 101 (Test Condition B)
|
|
Temperature Cycling
|
MIL-Std. 202 Method 102 (Test Condition D)
|
|
Altitude
|
MIL-Std. 202 Method 105 (Test Condition C)
|
|
Vibration
|
MIL-Std. 202 Method 204 (Test Condition D)
|
|
Moisture Resistance
|
MIL-Std. 202 Method 106
|
