|
N Plug-Male 50 Ohm 2 Watt Terminator
AIR802® model CNTERM50NM is a N type plug-male 50 ohm 2 watt terminator.
Product Description - Model CNTERM50NM
This AIR802® product is a N plug or male 50 ohm 2 watt resistor terminator with excellent electrical charateristics. These are also sometimes referred to as dummy loads and are utilized on active RF ports. If you have a non active port then consider our CNNMCAP as an alternative to preventing dust contamination or water entry.
This terminator is tri-metal (copper/tin/zinc) plated, or sometimes referred to as white bronze for corrosion resistance and low intermodulation distortion.
Specifications
| ELECTRICAL | |
| Impedance | 50 ohms |
| Frequency Range | DC to 11 GHz |
| Input Power | 2 Watts |
| Voltage Rating | 1500 Volts Peak |
| VSWR | < 1.2 |
| MATERIAL | |
| Body | Tri-Metal Plated Brass |
| Contact Pin | Gold Plated Brass |
| Insulator | PTFE |
| Shell | Tri-Metal Plated Brass |
| Gasket | Orange Silicon Rubber |
| Retaining Ring | Tri-Metal Plated Brass |
| Sleeve | Tri-Metal Plated Brass |
| Resistor | 50 Ohm |
| Grounding | Tri-Metal Plated Brass |
| MECHANICAL | |
| Mating | 5/8-24UNEF-2B |
| Mating Torque | 15 inch pounds Maximum |
| ENVIRONMENTAL | |
| Temperature | -67°F to 185°F (-55°C to 85° C) |
| RoHS Compliant | Yes |
| Corrosion | MIL-Std. 202 Method 101 (Test Condition C) |
| Temperature Cycling | MIL-Std. 202 Method 102 (Test Condition C) |
| Altitude | MIL-Std. 202 Method 105 (Test Condition C) |
| Vibration | MIL-Std. 202 Method 204 (Test Condition B) |
| Moisture Resistance | MIL-Std. 202 Method 106 (Test Condition B) |
