|
|
|
DC - DC Converter + PoE Injector with 12VDC or 24VDC (10 to 26 vdc) Input and 48VDC PoE Output (Din Rail Mount)
AIR802® part number PDCPOE1248DR is a DC to DC converter with power-over-Ethernet or PoE output. This model has a 10 to 26 vdc input range and a 48 vdc output as PoE. It is DIN rail mountable. This unit supports passive PoE or IEEE 802.3af Mode B PoE. Manufactured in USA.
- The default or primary use is to connect the + and - leads to the screw terminal which plugs into the front of the device. This allows direct connectivity to a battery, dc fuse terminal or other dc source.
- Optionally the dc input voltage may enter from the network jack as PoE by opening the housing and sliding the switch to the opposite position.
- One jack is labeled, "Network" for network connectivity and will ordinarily connect to a switch, router, computer or other device.
- The other jack is labeled, "Equip + PoE" and is the output jack with 48vdc.
Internally the data pins 1,2,3 and 6 are internally connected together between the two jacks. Pins 4 and 5 (+48vdc) and pins 7 and 8 (ground) are switched between the external dc connector or the Network jack to the Equip + PoE jack.
• Powering access points requiring 48vdc in marine vessels
Specifications
|
POWER INPUT
|
|
|
Input DC Voltage Range
|
10 to 26 vdc
|
|
Efficiency
|
75 to 84% (typical)
|
|
Minimum Current
|
3 amps @ 10 vdc *under full output load
|
|
Input Options
|
PoE or Direct Screw Terminal
|
|
POWER OUTPUT
|
|
|
Output DC Voltage
|
48 vdc
|
|
Maximum Current
|
0.8 amps (0.6 amps typical)
|
|
Maximum Power
|
36 watts
|
|
Voltage Tolerance
|
+/- 5%
|
|
Short Circuit Protection
|
Yes
|
|
Over Current Protection
|
Yes
|
|
Over Voltage Protection
|
Yes
|
|
ENVIRONMENTAL
|
|
|
Operating Temperature
|
-30℃ to 75℃ (-22º to 167ºF)
|
|
Humidity
|
5 to 90% RH
|
|
Safety Standards
|
UL 60950-1 (In process), CE
|
|
MECHANICAL
|
|
|
Mounting
|
DIN rail
|
|
Enclosure Material
|
PC UL 94 V-0
|
|
Dimensions - Height
|
10cm (3.9 inches)
|
|
Dimensions - Depth
|
9cm (3.5 inches) *from DIN rail mount to edge of DC connector
|
|
Dimensions - Width
|
4cm (1.5 inches)
|
|
Weight
|
224 grams (7.9 ounces)
|
Download PDF Data Sheet (English) (Spanish) (French)
Product Warranty
This antenna is of absolute quality and is fully covered under by the AIR802 Limited Warranty.
tel: (630) 585-6383 sales@air802.com ventas@air802.com
