UHF Jack-Female or SO-239 Coaxial Connector for AIR802 CA600 or Times Microwave LMR-600 Cable

AIR802® model CN6UHFJ is a UHF type jack-female crimp style connector for AIR802 CA600, Times Microwave LMR600, and similar size cables.

Product Description - Model CN6UHFJ

This AIR802® connector is an UHF Jack (Female) or SO-239 style connector for AIR802® CA600, Times Microwave LMR600® or similar cables. The center pin can be soldered or may be crimped with our TL-CRIMP06-2 crimp tool.

In order to provide superior performance and longevity AIR802® has designed and manufactured this premium connector with tri-metal Albaloy (Copper/Tin/Zinc) plated brass. Standard connectors are nickel or silver plated brass. This tri-metal (Albaloy) is a premium class connector providing the best possible performance. Now you can have both corrosion resistant and low Intermodulation distortion (IMD) characteristics in one product. We provide the following chart to illustrate the positive and negative characteristics of each plating type.

Plating Material	Pro	Con
Silver	Low Intermodulation Distortion (IMD)	Expensive Low Corrosion Resistance



Nickel	Less Expensive Good Corrosion Resistance	Potential Intermodulation Distortion (IMD) in N and Other Large Size Connectors



Tri-Metal Albaloy (Copper/Tin/Zinc)	Corrosion Resistant Low Intermodulation Distortion (IMD)	Expensive

AIR802® manufactures high precision and performance connectors. Connector selection is extremely important to insure proper operation and reliability. Poorly constructed connectors will cause higher VSWR and insertion loss resulting in electrical noise and intermittent issues. AIR802® manufactures very large quantities of connectors for our global customers allowing us to provide an attractive quality to price ratio.

In choosing connectors, it is important to match one to the type of cable being used, the impedance (50 versus 75 ohms), the frequency support, insertion loss, voltage rating and environmental specifications. If you are an amateur considering buying connectors to install, we recommend that you purchase our pre-manufactured antenna cable assemblies which have been professionally assembled and tested. Installation of connectors without experience and proper equipment will lead to improperly terminated connectors.

UHF style connectors are used for lower band frequencies such as ham radio, CB, etc. up to 300 MHz.

Specifications

ELECTRICAL
Impedance	Non-Constant
Frequency Range	DC ~ 300 MHz
Voltage Rating	500 Volts Peak
Dielectric Withstanding Voltage	1000 Volts RMS
Insertion Loss	< 0.20 dB
MATERIAL
Body	Tri-Metal Albaloy (Copper/Tin/Zinc) Plated Brass
Contact	Gold Plated Brass
Insulator	TFE
Ferrule	Tri-Metal Albaloy (Copper/Tin/Zinc) Plated Brass
MECHANICAL
Cable Attachment	Hex Braid Crimp
Center Conductor Attachment	Solder or Crimp (via a new tool to be released approx 0ct 1, 2010)
Cable Retention	60 lbs. Pull
Mating	5/8 - 24 UNEF Threading Coupling
Mating Torque	15 inch pounds Maximum
ENVIRONMENTAL
Temperature	-67°F to 185°F (-55°C to 85° C)
RoHS Compliant	Yes
Corrosion	MIL-Std. 202 Method 101 (Test Condition C)
Temperature Cycling	MIL-Std. 202 Method 102 (Test Condition C)
Altitude	MIL-Std. 202 Method 105 (Test Condition C)
Vibration	MIL-Std. 202 Method 204 (Test Condition B)
Moisture Resistance	MIL-Std. 202 Method 106 (Test Condition B)