|
Reverse-Polarity TNC-Jack or Female Crimp Connector for Cable Types: AIR802 CA600, Times Microwave LMR600 and Equivalent Cables
This connector part number CN6RTJ is a reverse polarity tnc or rp-tnc crimp style jack or female connector is designed to used with and fit 600-series style cable such as AIR802 CA600 and Times Microwave LMR600 cable.
This connector part number CN6RTJ is a reverse polarity tnc or rp-tnc crimp style jack or female connector is designed to used with and fit 600-series style cable such as AIR802 CA600 and Times Microwave LMR600 cable.
AIR802® manufactures high precision and performance connectors. Connector selection is extremely important to insure proper operation and reliability. Poorly constructed connectors will cause higher VSWR and insertion loss resulting in electrical noise and intermittent issues. AIR802® manufactures very large quantities of connectors for our global customers allowing us to provide an attractive quality to price ratio.
In choosing connectors, it is important to match one to the type of cable being used, the impedance (50 versus 75 ohms), the frequency support, insertion loss, voltage rating and environmental specifications. If you are an amateur considering buying connectors to install, we recommend that you purchase our pre-manufactured antenna cable assemblies which have been professionally assembled and tested. Installation of connectors without experience and proper equipment will lead to improperly terminated connectors.
This connector is RP-TNC jack for 600-Series type cables. Connectors can be a bit confusing regarding the gender. Note that both Reverse Polarity (RP) TNC and regular TNC connectors exist. RP-TNC is common with many wireless products. The RP-TNC jack is a female connector. It has threads on the outside and the pin protrudes from inside the connector. This causes confusion for many not familiar with various connector types leading them to believe that this is the male, however it is the female. We generally prefer the terms plug or jack to refer to connector genders in order to avoid confusion.
Specifications
| ELECTRICAL | |
| Impedance | 50 ohms |
| Frequency Range | DC ~ 11 GHz |
| Voltage Rating | 500 Volts Peak |
| Dielectric Withstanding Voltage | 1500 Volts RMS |
| Insertion Loss | .20 dB Max. |
| MATERIAL | |
| Body | Nickel Plated Brass |
| Contact | Gold Plated Brass |
| Insulator | TFE |
| Ferrule | Nickel Plated Brass |
| MECHANICAL | |
| Cable Attachment | Hex Braid Crimp |
| Center Conductor Attachment | Crimp or Solder |
| Cable Retention | 60 lbs. Pull |
| Mating | 7/16 - 28 UNEF Threading Coupling |
| Mating Torque | 15 inch pounds Maximum |
| ENVIRONMENTAL | |
| Temperature | -67°F to 185°F (-55°C to 85° C) |
| RoHS Compliant | Yes |
| Corrosion | MIL-Std. 202 Method 101 (Test Condition B) |
| Temperature Cycling | MIL-Std. 202 Method 102 (Test Condition D) |
| Altitude | MIL-Std. 202 Method 105 (Test Condition C) |
| Vibration | MIL-Std. 202 Method 204 (Test Condition D) |
| Moisture Resistance | MIL-Std. 202 Method 106 (Test Condition B) |
Download PDF Connector Drawing
Product Warranty
This connector is of absolute quality and is fully covered under by the Air802 LLC Limited Warranty.
