|
N Plug-Male Crimp Connector, Nickel Plated Finish for Cable Types: RG8, AIR802 CA400, Times Microwave's LMR400, Belden 9913, Belden 7810
AIR802® model CN4NMC is a N type plug-male crimp connector for AIR802 CA400, Times Microwave LMR400, RG8, Belden 9913 and 7810 size cables.
AIR802® manufactures high precision and performance connectors. Connector selection is extremely important to insure proper operation and reliability. Poorly constructed connectors will cause higher VSWR and insertion loss resulting in electrical noise and intermittent issues. AIR802® manufactures very large quantities of connectors for our global customers allowing us to provide an attractive quality to price ratio.
In choosing connectors, it is important to match one to the type of cable being used, the impedance (50 versus 75 ohms), the frequency support, insertion loss, voltage rating and environmental specifications. If you are an amateur considering buying connectors to install, we recommend that you purchase our pre-manufactured antenna cable assemblies which have been professionally assembled and tested. Installation of connectors without experience and proper equipment will lead to improperly terminated connectors.
This connector is N-Male. N type connectors were developed in the 1940's by Paul Neill of Bell Labs and were one of the first connectors capable of transmitting microwave frequencies. N type connectors are manufactured in both 50 and 75 ohm versions. Our N type connectors are all 50 ohm varieties.
Specifications
| ELECTRICAL | |
| Impedance | 50 ohms |
| Frequency Range | DC ~ 11 GHz |
| Voltage Rating | 1500 Volts Peak |
| Dielectric Withstanding Voltage | 2500 Volts RMS |
| Insertion Loss | .20 dB Max. |
| MATERIAL | |
| Body | Nickel Plated Brass |
| Contact | Gold Plated Brass |
| Insulator | TFE |
| Ferrule | Nickel Plated Brass |
| MECHANICAL | |
| Cable Attachment | Hex Braid Crimp |
| Center Conductor Attachment | Crimp or Solder |
| Cable Retention | 60 lbs. Pull |
| Mating | 5/8 - 24 UNEF Threading Coupling |
| Mating Torque | 15 inch pounds Maximum |
| ENVIRONMENTAL | |
| Temperature | -67°F to 185°F (-55°C to 85° C) |
| Weatherproof | N-Type Connectors are Weatherproof by Design |
| RoHS Compliant | Yes |
| Corrosion | MIL-Std. 202 Method 101 (Test Condition C) |
| Temperature Cycling | MIL-Std. 202 Method 102 (Test Condition C) |
| Altitude | MIL-Std. 202 Method 105 (Test Condition C) |
| Vibration | MIL-Std. 202 Method 204 (Test Condition B) |
| Moisture Resistance | MIL-Std. 202 Method 106 (Test Condition B) |
